Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kawamura, Yoshinori; Enoeda, Mikio; Yamanishi, Toshihiko; Nishi, Masataka
Fusion Engineering and Design, 81(1-7), p.809 - 814, 2006/02
Times Cited Count：14 Percentile：68.04(Nuclear Science & Technology)Tritium bred in the solid breeder blanket of a fusion reactor is extracted by passing of a helium sweep gas. Tritium is separated from sweep gas at the blanket tritium recovery system. Palladium membrane diffuser is one of the applicable processes for the blanket tritium recovery system. It is usually applied for hydrogen purification system such as TEP in ITER. However, it has been reported that the rate controlling step changes at lower hydrogen pressure such as the blanket sweep gas condition, and discussion about application for the blanket sweep gas condition is not enough. Recently, conceptual design of the demonstration reactor, named "DEMO2001", has been proposed from JAERI. In this report, the application of the Pd diffuser for the blanket sweep gas condition is discussed based on the condition of DEMO 2001.
Kawamura, Yoshinori; Iwai, Yasunori; Nakamura, Hirofumi; Hayashi, Takumi; Yamanishi, Toshihiko; Nishi, Masataka
Fusion Science and Technology, 48(1), p.654 - 657, 2005/07
Times Cited Count：3 Percentile：24.17(Nuclear Science & Technology)Adding some amount of hydrogen to the helium sweep gas is effective for tritium extraction from blanket, but it causes permeation of tritium to a cooling system. In the design study of a demonstration reactor in JAERI, tritium leakage has been estimated to be about 20% of bred tritium under typical sweep gas conditions. If these tritiums are recovered under the ITER-WDS condition, tritium leakage limitation has to be less than 0.3% of typical case. Water vapor addition to the sweep gas is effective not only for blanket tritium extraction but also for permeation prevention. The reaction rate of isotope exchange is larger than the case of H
, and the equilibrium constant is also expected to be about 1.0. When the H/T ratio is 100, tritium inventory of breeder material is larger than the case of H addition. However it is not so large. In case of HO sweep, separation of tritiated water from helium seems to be easyer, but the process that changes HTO to HT is necessary.
Ogawa, Hiroaki*; Kiuchi, Kiyoshi
JAERI-Research 2002-037, 48 Pages, 2002/12
JAERI-Research-2002-037.pdf:2.57MB
The difference in hydrogen permeation among candidate cladding materials such as 25Cr-35Ni stainless steel, Nb liner and reference materials such as 18Cr-8Ni SS, and Zr of Zircaloy base metal were evaluated by low energy plasma permeation simulated to hydrogen excited by heavy neutron irradiation. RF excitation source was arranged for the experimental apparatus in cooperating with temperature and bias control. Comparing with the thermodynamic gas driven permeation (GDP) in the same hydrogen pressure, the hydrogen permeation rate by the plasma driven permeation (PDP) was markedly accelerated at low to medium temperature range. The temperature dependency showed a knick at around 530K due to hydrogen-defect interactions. Comparing with Zr, Nb showed the high hydrogen solubility without the degradation by hydrate formation that is required to a getter material. The difference in PDP among candidates was analyzed with a new dissolution model for hydrogen.
Shiozawa, Shusaku; Ogawa, Masuro; Inagaki, Yoshiyuki; Onuki, Kaoru; Takeda, Tetsuaki; Nishihara, Tetsuo; Hayashi, Koji; Kubo, Shinji; Inaba, Yoshitomo; Ohashi, Hirofumi
Proceedings of 17th KAIF/KNS Annual Conference, p.557 - 567, 2002/04
The research and development program on nuclear production of hydrogen was started on January in 1997 as a study consigned by Ministry of Education, Culture, Sports, Science and Technology. A hydrogen production system connected to the HTTR is being designed to be able to produce hydrogen of about 4000 m3/h by steam reforming of natural gas, using a nuclear heat of 10 MW supplied by the HTTR. In order to confirm controllability, safety and performance of key components in the HTTR hydrogen production system, the facility for an out-of-pile test was constructed on the scale of approximately 1/30 of the HTTR hydrogen production system. Essential tests are also carried out to obtain detailed data for safety review and development of analytical codes. Other basic studies on the hydrogen production technology of thermochemical water splitting called an iodine sulfur (IS) process, has been carried out for more effective and various uses of nuclear heat. This paper describes the present status and a future plan on the R&D of the HTTR hydrogen production systems in JAERI.
Onuki, Kaoru; *; Nakajima, Hayato; Shimizu, Saburo
J. Chem. Eng. Jpn., 30(2), p.359 - 362, 1997/00
Times Cited Count：3 Percentile：35.24(Engineering, Chemical)no abstracts in English
